Description
Klipsch RP-600M II Walnut, Pair
Product Details
The Klipsch RP-600M II is a two-way bookshelf speaker with a single 6.5" Cerametallic woofer, sold as a pair. It reaches 44Hz — unusually low for a stand-mount — at 94.5dB sensitivity, which makes it a genuine full-range option in a small room as well as a front or surround channel in a larger system.
A 90° x 90° silicon composite hybrid Tractrix horn sits at the center of the design. Horn loading raises efficiency and focuses high frequencies toward the listening position, while the phase plug and compression-molded silicon face keep the response smooth. The second-generation horn is larger than the original Reference Premiere, widening the soundstage and improving directivity.
Cerametallic cone woofers are exceptionally rigid and light for their mass, which keeps cone break-up out of the passband. Faraday rings and aluminum shorting rings in the redesigned motor reduce distortion and increase power handling, with better transient control than the first-generation Reference Premiere.
Dual aluminum binding posts allow bi-wiring or bi-amping. Bi-wiring separates high- and low-frequency current into separate cables to reduce intermodulation distortion in the midrange; bi-amping allows outboard crossovers and separate amplification. Cork pads replace rubber bumpers on the base for secure placement on a stand or shelf. Cabinets are internally braced MDF in scratch-resistant ebony vinyl with satin-painted baffles. The grille is magnetically attached and fully removable, so the speaker moves between showpiece and discreet without hardware on the baffle.
Features
- 6.5" Cerametallic cone woofer; 44Hz – 25kHz +/- 3dB
- 94.5dB sensitivity; 100W / 400W power handling
- Bass reflex via rear-firing Tractrix port
- Dual aluminum binding posts for bi-wiring / bi-amping
- Cork pads for secure placement on stands or shelves
- Sold as a pair
- 90° x 90° silicon composite hybrid Tractrix horn — larger second-generation horn
- 1" Titanium LTS vented tweeter for low distortion and extended high frequencies
- Cerametallic cone woofers with Faraday rings and aluminum shorting rings
- Vented tweeter housing reduces standing waves behind the diaphragm
- Internally braced MDF cabinet with satin-painted baffle
- Magnetically attached, removable grille
- Scratch-resistant walnut vinyl finish
Specifications
| Technical | |
|---|---|
| Frequency Response | 44-25kHz +/- 3dB |
| Sensitivity | 94.5dB @ 2.83V / 1m* |
| Power Handling (Cont/Peak) | 100W/400W |
| Nominal Impedance | 8 Ohms Compatible |
| Crossover Frequency | 1500Hz |
| High Frequency Driver | 1" Titanium LTS Vented Tweeter with Hybrid Cross-Section Expanded Tractrix® Horn |
| Low Frequency Driver | 6.5" Cerametallic Cone Woofer with Faraday rings |
| Enclosure Material | MDF (Internally Braced) |
| Enclosure Type | Bass Reflex via rear-firing Tractrix® Port |
| Inputs | Dual aluminum binding posts/bi-wire/bi-amp |
| Physical | |
|---|---|
| Height | 15.75" (40.0 cm) |
| Width | 7.95" (20.2 cm) |
| Depth | 13.00" (33.0 cm) |
| Weight | 18.1lb (8.20kg) |
| Finish | Walnut |
Specifications subject to change.
Downloads