Description
Klipsch RP-6000F II Walnut, Each
Product Details
The Klipsch RP-6000F II is a two-way floorstanding speaker with dual 6.5" Cerametallic woofers, reaching 38Hz with 96dB sensitivity. It is the mid-size tower in the Reference Premiere II line — full-range enough to run without a subwoofer in most rooms, and efficient enough to play loudly on modest amplification.
A 90° x 90° silicon composite hybrid Tractrix horn sits at the center of the design. Horn loading raises efficiency and focuses high frequencies toward the listening position, while the phase plug and compression-molded silicon face keep the response smooth. The second-generation horn is larger than the original Reference Premiere, widening the soundstage and improving directivity.
Cerametallic cone woofers are exceptionally rigid and light for their mass, which keeps cone break-up out of the passband. Faraday rings and aluminum shorting rings in the redesigned motor reduce distortion and increase power handling, with better transient control than the first-generation Reference Premiere.
Dual aluminum binding posts allow bi-wiring or bi-amping. Bi-wiring separates high- and low-frequency current into separate cables to reduce intermodulation distortion in the midrange; bi-amping allows outboard crossovers and separate amplification. Cabinets are internally braced MDF in scratch-resistant ebony vinyl with satin-painted baffles. The grille is magnetically attached and fully removable, so the speaker moves between showpiece and discreet without hardware on the baffle.
Features
- Dual 6.5" Cerametallic cone woofers; 38Hz – 25kHz +/- 3dB
- 96dB sensitivity; 125W / 500W power handling
- Bass reflex via dual-chamber rear-firing Tractrix ports
- Dual binding posts for bi-wiring / bi-amping
- 90° x 90° silicon composite hybrid Tractrix horn — larger second-generation horn
- 1" Titanium LTS vented tweeter for low distortion and extended high frequencies
- Cerametallic cone woofers with Faraday rings and aluminum shorting rings
- Vented tweeter housing reduces standing waves behind the diaphragm
- Internally braced MDF cabinet with satin-painted baffle
- Magnetically attached, removable grille
- Scratch-resistant walnut vinyl finish
Specifications
| Technical | |
|---|---|
| Frequency Response | 38-25kHz +/- 3dB |
| Sensitivity | 96dB @ 2.83V / 1m* |
| Power Handling (Cont/Peak) | 125W/500W |
| Nominal Impedance | 8 Ohms Compatible |
| Crossover Frequency | 1770Hz |
| High Frequency Driver | 1" Titanium LTS Vented Tweeter with Hybrid Cross-Section Expanded Tractrix® Horn |
| Low Frequency Driver | Dual 6.5" Cerametallic Cone Woofers with Faraday rings |
| Enclosure Material | MDF (Internally Braced) |
| Enclosure Type | Bass Reflex via dual chamber rear-firing Tractrix® Ports |
| Inputs | Dual binding posts / bi-wire / bi-amp |
| Physical | |
|---|---|
| Height | 39.60" (100.6 cm) |
| Width | 9.29" (23.6 cm) |
| Depth | 17.57" (44.6 cm) |
| Weight | 49.4lb (22.4kg) |
| Finish | Walnut |
Specifications subject to change.
Downloads